On Wed, Aug 31, 2016 at 12:02 PM, Vladimir Barinov <[email protected]> wrote: > This supports Ethernet AVB on H3ULCB board > > Signed-off-by: Vladimir Barinov <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]> > --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts > +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts > @@ -62,3 +68,29 @@ > clock-frequency = <14745600>; > status = "okay"; > }; > + > +&avb { > + pinctrl-0 = <&avb_pins>; > + pinctrl-names = "default"; > + renesas,no-ether-link; > + phy-handle = <&phy0>; > + status = "okay"; > + > + phy0: ethernet-phy@0 { > + rxc-skew-ps = <900>; > + rxdv-skew-ps = <0>; > + rxd0-skew-ps = <0>; > + rxd1-skew-ps = <0>; > + rxd2-skew-ps = <0>; > + rxd3-skew-ps = <0>; > + txc-skew-ps = <900>; > + txen-skew-ps = <0>; > + txd0-skew-ps = <0>; > + txd1-skew-ps = <0>; > + txd2-skew-ps = <0>; > + txd3-skew-ps = <0>; > + reg = <0>; > + interrupt-parent = <&gpio2>; > + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; Just wondering (it's done the same way on Salvator-X) why this is using a GPIO interrupt, and not the dedicated AVB_PHY_INT? > + }; > +}; Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
