Define the Wheat board dependent part of the DU device node. Add the device nodes for the Analog Devices ADV7513 HDMI transmitters connected to DU0/1. Add the necessary subnodes to interconnect DU with HDMI transmitters/connectors.
Signed-off-by: Sergei Shtylyov <[email protected]> --- This patch is against the 'renesas-devel-20160901-v4.8-rc4' of Simon Horman's 'renesas.git' repo plus the Wheat CAN and SDHI patches posted earlier... The path depends on the 2 DRM patches just posted in order to work correctly! arch/arm/boot/dts/r8a7792-wheat.dts | 126 ++++++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7792-wheat.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7792-wheat.dts +++ renesas/arch/arm/boot/dts/r8a7792-wheat.dts @@ -66,6 +66,34 @@ gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + hdmi-out0 { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con0: endpoint { + remote-endpoint = <&adv7513_0_out>; + }; + }; + }; + + hdmi-out1 { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con1: endpoint { + remote-endpoint = <&adv7513_1_out>; + }; + }; + }; + + osc2_clk: osc2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -103,6 +131,16 @@ groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; }; + + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp"; + function = "du0"; + }; + + du1_pins: du1 { + groups = "du1_rgb666", "du1_sync", "du1_disp"; + function = "du1"; + }; }; &scif0 { @@ -134,3 +172,91 @@ cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + hdmi@3d { + compatible = "adi,adv7513"; + reg = <0x3d>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_0_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7513_0_out: endpoint { + remote-endpoint = <&hdmi_con0>; + }; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7513"; + reg = <0x39>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_1_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + + port@1 { + reg = <1>; + adv7513_1_out: endpoint { + remote-endpoint = <&hdmi_con1>; + }; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-names = "default"; + + clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>, + <&osc2_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7513_0_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&adv7513_1_in>; + }; + }; + }; +};
