The text states that default-input is an endpoint property, but in the
example it is a device property.  The example makes more sense.

Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
---
 Documentation/devicetree/bindings/media/i2c/adv7604.txt | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt 
b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 8337f75..9cbd92e 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -34,6 +34,7 @@ The digital output port node must contain at least one 
endpoint.
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the device's reset pin.
+  - default-input: Select which input is selected after reset.
 
 Optional Endpoint Properties:
 
@@ -47,8 +48,6 @@ Optional Endpoint Properties:
   If none of hsync-active, vsync-active and pclk-sample is specified the
   endpoint will use embedded BT.656 synchronization.
 
-  - default-input: Select which input is selected after reset.
-
 Example:
 
        hdmi_receiver@4c {
-- 
2.9.3

Reply via email to