From: Hans Verkuil <hverk...@xs4all.nl>

Add support in the dts for the HDMI input. Based on the Lager dts
patch from Ulrich Hecht.

Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
[uli: removed "renesas," prefixes from pfc nodes]
Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 41 +++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts 
b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f8a7d09..45b8b5f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -393,6 +393,11 @@
                function = "usb1";
        };
 
+       vin0_pins: vin0 {
+               groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+               function = "vin0";
+       };
+
        vin1_pins: vin1 {
                groups = "vin1_data8", "vin1_clk";
                function = "vin1";
@@ -596,6 +601,21 @@
                };
        };
 
+       hdmi-in@4c {
+               compatible = "adi,adv7612";
+               reg = <0x4c>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+               remote = <&vin0>;
+               default-input = <0>;
+
+               port {
+                       adv7612: endpoint {
+                               remote-endpoint = <&vin0ep>;
+                       };
+               };
+       };
+
        eeprom@50 {
                compatible = "renesas,24c02";
                reg = <0x50>;
@@ -672,6 +692,27 @@
        cpu0-supply = <&vdd_dvfs>;
 };
 
+/* HDMI video input */
+&vin0 {
+       status = "okay";
+       pinctrl-0 = <&vin0_pins>;
+       pinctrl-names = "default";
+
+       port {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vin0ep: endpoint {
+                       remote-endpoint = <&adv7612>;
+                       bus-width = <24>;
+                       hsync-active = <0>;
+                       vsync-active = <0>;
+                       pclk-sample = <1>;
+                       data-active = <1>;
+               };
+       };
+};
+
 /* composite video input */
 &vin1 {
        status = "okay";
-- 
2.9.3

Reply via email to