[PATCH v3 11/11] ARM: dts: sk-rzg1m: add Ether support

[Sergei Shtylyov]

Define the SK-RZG1M board dependent part of the Ether device node.
Enable DHCP and NFS root  for the kernel booting.

Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shif...@cogentembedded.com>.

Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>

---
Changes in version 2:
- new patch.

 arch/arm/boot/dts/r8a7743-sk-rzg1m.dts |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

Index: renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ renesas/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -20,7 +20,7 @@
        };
 
        chosen {
-               bootargs = "ignore_loglevel";
+               bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
                stdout-path = "serial0:115200n8";
        };
 
@@ -42,3 +42,16 @@
 &scif0 {
        status = "okay";
 };
+
+&ether {
+       phy-handle = <&phy1>;
+       renesas,ether-link-active-low;
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+               interrupt-parent = <&irqc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+               micrel,led-mode = <1>;
+       };
+};