On 11/02/2016 02:38 PM, Geert Uytterhoeven wrote:
Add the common R-Car Gen2 (and RZ/G) Clock Pulse Generator / Module Standby
and Software Reset support code, using the CPG/MSSR driver core.
Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
<[email protected]>.
Signed-off-by: Sergei Shtylyov <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
---
This patch is against the 'clk-next' branch of CLK group's 'linux.git' repo.
Changes in version 2:
- added support for non-existing PLL0CR;
- removed the function reading the mode pins;
- added/used the #define's for PLL0CR.STC;
- used CPG_FRQCRC_ZFC_SHIFT to #define CPG_FRQCRC_ZFC_MASK;
- removed rcar_gen2_read_modemr();
- added Geert's tag.
drivers/clk/renesas/rcar-gen2-cpg.c | 369 ++++++++++++++++++++++++++++++++++++
drivers/clk/renesas/rcar-gen2-cpg.h | 42 ++++
2 files changed, 411 insertions(+)
Index: linux/drivers/clk/renesas/rcar-gen2-cpg.c
===================================================================
--- /dev/null
+++ linux/drivers/clk/renesas/rcar-gen2-cpg.c
@@ -0,0 +1,369 @@
+struct clk * __init rcar_gen2_cpg_clk_register(struct device *dev,
+ const struct cpg_core_clk *core,
+ const struct cpg_mssr_info *info,
+ struct clk **clks,
+ void __iomem *base)
+{
+ case CLK_TYPE_GEN2_PLL0:
+ /*
+ * PLL0 is a configurable multiplier clock except on R-Car E2.
... and V2H.
+ * Register the PLL0 clock as a fixed factor clock for now as
+ * there's no generic multiplier clock implementation and we
+ * currently have no need to change the multiplier value.
+ */
+ mult = cpg_pll_config->pll0_mult;
+ if (mult) {
+ /* PLL0 is VCO/3 on R-Car E2 */
... and V2H.
+ div = 3;
After seeing the r8a7745 driver, I think it would be better to use a divider
value of 1 here (dropping the need for this branch), and handle the /3 in the
SoC-specific driver.
This would make it more similar to the other SoCs here (div = 1 in the else
branch below), and to similar clocks in the SoC-specific driver
(e.g. DEF_FIXED("zg", ..., 3, 1) in r8a7743-cpg-mssr.c).
We'll then have to lie about the PLL0 output freq? I don't like it...
MBR, Sergei
