From: Sergei Shtylyov <[email protected]> Define the SK-RZG1M board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin <[email protected]>. Signed-off-by: Sergei Shtylyov <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]> --- arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index ed26961c9434..3a22538208f2 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -42,3 +42,16 @@ &scif0 { status = "okay"; }; + +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; -- 2.7.0.rc3.207.g0ac5344
