On Thu, Jan 05, 2017 at 12:43:26PM +0100, Wolfram Sang wrote:
> Before enabling SDIO irqs, clear the status bit, so we discard old and
> stale interrupts. Needed to get two wireless cards working.
>
> Signed-off-by: Wolfram Sang <[email protected]>
> ---
> drivers/mmc/host/tmio_mmc_pio.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
> index d6033620a45c12..ebe3e12f0083dd 100644
> --- a/drivers/mmc/host/tmio_mmc_pio.c
> +++ b/drivers/mmc/host/tmio_mmc_pio.c
> @@ -134,12 +134,21 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host
> *mmc, int enable)
> struct tmio_mmc_host *host = mmc_priv(mmc);
>
> if (enable && !host->sdio_irq_enabled) {
> + u16 sdio_status;
> +
> /* Keep device active while SDIO irq is enabled */
> pm_runtime_get_sync(mmc_dev(mmc));
> - host->sdio_irq_enabled = true;
>
> + host->sdio_irq_enabled = true;
> host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
> ~TMIO_SDIO_STAT_IOIRQ;
> +
> + /* Clear obsolete interrupts before enabling */
> + sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS) &
> ~TMIO_SDIO_MASK_ALL;
> + if (host->pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
> + sdio_status |= 6;
Perhaps a #define would be an improvement over "6".
> + sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
> +
> sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
> } else if (!enable && host->sdio_irq_enabled) {
> host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
> --
> 2.11.0
>
