Some controllers have 2 clock sources instead of 1, so they both need
to be turned on/off.

Signed-off-by: Chris Brandt <chris.bra...@renesas.com>
---
v2:
* changed clk2 to clk_cd
* disable clk if clk_cd enable fails
* changed clock name from "carddetect" to "cd"
---
 drivers/mmc/host/sh_mobile_sdhi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/host/sh_mobile_sdhi.c 
b/drivers/mmc/host/sh_mobile_sdhi.c
index 59db14b..a3f995e 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -143,6 +143,7 @@ MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
 
 struct sh_mobile_sdhi {
        struct clk *clk;
+       struct clk *clk_cd;
        struct tmio_mmc_data mmc_data;
        struct tmio_mmc_dma dma_priv;
        struct pinctrl *pinctrl;
@@ -190,6 +191,12 @@ static int sh_mobile_sdhi_clk_enable(struct tmio_mmc_host 
*host)
        if (ret < 0)
                return ret;
 
+       ret = clk_prepare_enable(priv->clk_cd);
+       if (ret < 0) {
+               clk_disable_unprepare(priv->clk);
+               return ret;
+       }
+
        /*
         * The clock driver may not know what maximum frequency
         * actually works, so it should be set with the max-frequency
@@ -255,6 +262,8 @@ static void sh_mobile_sdhi_clk_disable(struct tmio_mmc_host 
*host)
        struct sh_mobile_sdhi *priv = host_to_priv(host);
 
        clk_disable_unprepare(priv->clk);
+       if (priv->clk_cd)
+               clk_disable_unprepare(priv->clk_cd);
 }
 
 static int sh_mobile_sdhi_card_busy(struct mmc_host *mmc)
@@ -572,6 +581,10 @@ static int sh_mobile_sdhi_probe(struct platform_device 
*pdev)
                goto eprobe;
        }
 
+       priv->clk_cd = devm_clk_get(&pdev->dev, "cd");
+       if (IS_ERR(priv->clk_cd))
+               priv->clk_cd = NULL;
+
        priv->pinctrl = devm_pinctrl_get(&pdev->dev);
        if (!IS_ERR(priv->pinctrl)) {
                priv->pins_default = pinctrl_lookup_state(priv->pinctrl,
-- 
2.10.1


Reply via email to