On 01/21/2017 01:12 AM, Stephen Boyd wrote: > On 01/12, Marek Vasut wrote: >> Add driver for IDT VersaClock 5 5P49V5923 and 5P49V5933 chips. These >> chips have two clock inputs, XTAL or CLK, which are muxed into single >> PLL/VCO input. In case of 5P49V5923, the XTAL in built into the chip >> while the 5P49V5923 requires external XTAL. >> >> The PLL feeds two fractional dividers. Each fractional divider feeds >> output mux, which allows selecting between clock from the fractional >> divider itself or from output mux on output N-1. In case of output >> mux 0, the output N-1 is instead connected to the output from the mux >> feeding the PLL. >> >> The driver thus far supports only the 5P49V5923 and 5P49V5933, while >> it should be easily extensible to the whole 5P49V59xx family of chips >> as they are all pretty similar. >> >> Signed-off-by: Marek Vasut <[email protected]> >> Cc: Michael Turquette <[email protected]> >> Cc: Stephen Boyd <[email protected]> >> Cc: Laurent Pinchart <[email protected]> >> Tested-by: Laurent Pinchart <[email protected]> >> Cc: [email protected] >> --- > > Applied to clk-next > Thank you :)
-- Best regards, Marek Vasut
