Hi Ulrich,
On Fri, Feb 3, 2017 at 11:38 AM, Ulrich Hecht
<[email protected]> wrote:
> Sets reasonable trigger defaults for the various SCIF variants.
> Also corrects the FIFO size for SH7705-style ports.
>
> Signed-off-by: Ulrich Hecht <[email protected]>
> Reviewed-by: Geert Uytterhoeven <[email protected]>
This patch (which is now in tty-next) breaks serial console input on
systems with a SCIFA serial port (r8a73a4/ape6evm, r8a7740/armadillo,
and sh73a0/kzm9g). Console input isn't received by the system, until
more characters have been accumulated in the FIFO than the trigger value
(32 on SCIFA), or until serial output is generated.
Unfortunately the later patches in this series do not fix this (except
by doing "echo 1 > /sys/class/tty/ttySC0/device/rx_fifo_trigger" manually).
SCIF serial consoles (on R-Car Gen2 and Gen3) seem to keep on working
fine.
> ---
> drivers/tty/serial/sh-sci.c | 29 ++++++++++++++++++++++++++++-
> 1 file changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
> index 050d028..520e344 100644
> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -148,6 +148,7 @@ struct sci_port {
> struct timer_list rx_timer;
> unsigned int rx_timeout;
> #endif
> + int rx_trigger;
>
> bool has_rtscts;
> bool autorts;
> @@ -450,7 +451,7 @@ static const struct sci_port_params
> sci_port_params[SCIx_NR_REGTYPES] = {
> [SCFCR] = { 0x18, 16 },
> [SCFDR] = { 0x1c, 16 },
> },
> - .fifosize = 16,
> + .fifosize = 64,
> .overrun_reg = SCxSR,
> .overrun_mask = SCIFA_ORER,
> .sampling_rate_mask = SCI_SR(16),
> @@ -2062,6 +2063,7 @@ static void sci_reset(struct uart_port *port)
> {
> const struct plat_sci_reg *reg;
> unsigned int status;
> + struct sci_port *s = to_sci_port(port);
>
> do {
> status = serial_port_in(port, SCxSR);
> @@ -2081,6 +2083,9 @@ static void sci_reset(struct uart_port *port)
> status &= ~(SCLSR_TO | SCLSR_ORER);
> serial_port_out(port, SCLSR, status);
> }
> +
> + if (s->rx_trigger > 1)
> + scif_set_rtrg(port, s->rx_trigger);
> }
>
> static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
> @@ -2615,6 +2620,28 @@ static int sci_init_single(struct platform_device *dev,
> if (unlikely(sci_port->params == NULL))
> return -EINVAL;
>
> + switch (p->type) {
> + case PORT_SCIFB:
> + sci_port->rx_trigger = 48;
> + break;
> + case PORT_HSCIF:
> + sci_port->rx_trigger = 64;
> + break;
> + case PORT_SCIFA:
> + sci_port->rx_trigger = 32;
> + break;
> + case PORT_SCIF:
> + if (p->regtype == SCIx_SH7705_SCIF_REGTYPE)
> + /* RX triggering not implemented for this IP */
> + sci_port->rx_trigger = 1;
> + else
> + sci_port->rx_trigger = 8;
> + break;
> + default:
> + sci_port->rx_trigger = 1;
> + break;
> + }
> +
> /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't
> * match the SoC datasheet, this should be investigated. Let platform
> * data override the sampling rate for now.
> --
> 2.7.4
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
