Hi,
This series adds support for hardware backed trip point windows. It is
based on top of v4.11-rc1 and is tested on R-Car H3 and M3-W.
The series starts out by fixing three issues (1/7, 2/7, 3/7) that should
not have been fixed by me before the initial driver where submitted to
upstream. Sorry for not spotting the issues sooner.
The series then extends the rcar_gen3_thermal driver with hardware
interrupts for trip point windows by implementing the .set_trips()
callback of struct thermal_zone_of_device_ops (4/7, 5/7). It then adds
suspend and resume handlers so that the hardware interrupts are
preserved across suspend/resume cycles (6/7, 7/7).
Niklas Söderlund (7):
thermal: rcar_gen3_thermal: add delay in .thermal_init on r8a7796
thermal: rcar_gen3_thermal: fix probe error path
thermal: rcar_gen3_thermal: remove unneeded mutex
thermal: rcar_gen3_thermal: record more information about each TSC
thermal: rcar_gen3_thermal: enable hardware interrupts for trip points
thermal: rcar_gen3_thermal: store device match data in private
structure
thermal: rcar_gen3_thermal: add suspend and resume support
drivers/thermal/rcar_gen3_thermal.c | 199 +++++++++++++++++++++++++++++++++---
1 file changed, 187 insertions(+), 12 deletions(-)
--
2.12.0
