From: Kuninori Morimoto <[email protected]>
Current Audio-DMAC is assigned "rx" as Audio-DMAC0, "tx" as Audio-DMAC1.
Thus, DVC "tx" should be assigned as Audio-DMAC1, instead of Audio-DMAC0.
Because of this, current platform board (using SRC/DVC/SSI)
Playback/Capture both will use same Audio-DMAC0
(but it depends on audio data path).
First note is that this "rx" and "tx" are from each IP point,
it doesn't mean Playback/Capture.
Second note is that Audio DMAC assigned on DT is only for
Audio-DMAC, Audio-DMAC-peri-peri has no entry.
=> Audio-DMAC
-> Audio-DMAC-peri-peri
-- HW connection
Playback case
[Mem] => [SRC]--[DVC] -> [SSI]--[Codec]
rx ~~~~~~~~~~~~
Capture
[Mem] <= [DVC]--[SRC] <- [SSI]--[Codec]
tx ~~~~~~~~~~~~
Signed-off-by: Kuninori Morimoto <[email protected]>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index dd681ff..884d2f5 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -1085,11 +1085,11 @@
rcar_sound,dvc {
dvc0: dvc-0 {
- dmas = <&audma0 0xbc>;
+ dmas = <&audma1 0xbc>;
dma-names = "tx";
};
dvc1: dvc-1 {
- dmas = <&audma0 0xbe>;
+ dmas = <&audma1 0xbe>;
dma-names = "tx";
};
};
--
1.9.1
