From: Vladimir Barinov <[email protected]>
This patch adds memory region:
- After changes, the H3ULCB board has the following map:
Bank0: 1GiB RAM : 0x000048000000 -> 0x0007fffffff
Bank1: 1GiB RAM : 0x000500000000 -> 0x0053fffffff
Bank2: 1GiB RAM : 0x000600000000 -> 0x0063fffffff
Bank3: 1GiB RAM : 0x000700000000 -> 0x0073fffffff
- Before changes, the old map looked like this:
Bank0: 1GiB RAM : 0x000048000000 -> 0x0007fffffff
Signed-off-by: Vladimir Barinov <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
---
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index c5f8f69a4f5f..9811534f296e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -33,6 +33,21 @@
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+ memory@500000000 {
+ device_type = "memory";
+ reg = <0x5 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x40000000>;
+ };
+
+ memory@700000000 {
+ device_type = "memory";
+ reg = <0x7 0x00000000 0x0 0x40000000>;
+ };
+
leds {
compatible = "gpio-leds";
--
2.7.0.rc3.207.g0ac5344
