Hi Magnus, On Mon, Mar 20, 2017 at 9:49 AM, Magnus Damm <[email protected]> wrote: > From: Magnus Damm <[email protected]> > > Update the r8a7795 SATA device node to use a 2MiB I/O space as specified > in the "72. Serial-ATA" section of R-Car-Gen3-rev0.52E.pdf > > Signed-off-by: Magnus Damm <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]> > --- 0001/arch/arm64/boot/dts/renesas/r8a7795.dtsi > +++ work/arch/arm64/boot/dts/renesas/r8a7795.dtsi 2017-03-20 > 17:41:36.390607110 +0900 > @@ -1209,7 +1209,7 @@ > > sata: sata@ee300000 { > compatible = "renesas,sata-r8a7795"; > - reg = <0 0xee300000 0 0x1fff>; > + reg = <0 0xee300000 0 0x200000>; While the datasheet does mention the 2 MiB area, it also says no (write) access should be made to registers not listed in the table, while these are all covered by the existing area? BTW, what about the Reference Clock Source Select Register, which lies in a further undocumented area? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
