PINMUX_IPSR_MSEL() macro invocation for the TX2 signal has apparently wrong
1st argument -- most probably a result of cut&paste programming...
Fixes: 508845196238 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Sergei Shtylyov <[email protected]>
---
This patch is against the 'fixes' branch of Linus Walleij's 'linux-pinctrl.git'
repo plus 2 R8A7791 fixes posted yesterday.
drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
===================================================================
--- linux-pinctrl.orig/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ linux-pinctrl/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -1103,7 +1103,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP6_5_3, FMIN_E, SEL_FM_4),
PINMUX_IPSR_GPSR(IP6_7_6, AUDIO_CLKOUT),
PINMUX_IPSR_MSEL(IP6_7_6, MSIOF1_SS1_B, SEL_SOF1_1),
- PINMUX_IPSR_MSEL(IP6_5_3, TX2, SEL_SCIF2_0),
+ PINMUX_IPSR_MSEL(IP6_7_6, TX2, SEL_SCIF2_0),
PINMUX_IPSR_MSEL(IP6_7_6, SCIFA2_TXD, SEL_SCIFA2_0),
PINMUX_IPSR_GPSR(IP6_9_8, IRQ0),
PINMUX_IPSR_MSEL(IP6_9_8, SCIFB1_RXD_D, SEL_SCIFB1_3),
