The Renesas R-Car H3 Salvator-X development board is equipped with an r8j7795 SiP with 4 GiB of RAM.
Hence migrate from r8a7795.dtsi to r8j7795-4x1g.dtsi. Signed-off-by: Geert Uytterhoeven <[email protected]> --- Questions: - Should this file be renamed to r8j7795-salvator-x.dts? --- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 27 +++------------------- 1 file changed, 3 insertions(+), 24 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index ff68bac4cd7ed2f5..e5b9409bf2d218d8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -32,12 +32,12 @@ */ /dts-v1/; -#include "r8a7795.dtsi" +#include "r8j7795-4x1g.dtsi" #include <dt-bindings/gpio/gpio.h> / { - model = "Renesas Salvator-X board based on r8a7795"; - compatible = "renesas,salvator-x", "renesas,r8a7795"; + model = "Renesas Salvator-X board based on r8j7795"; + compatible = "renesas,salvator-x", "renesas,r8j7795", "renesas,r8a7795"; aliases { serial0 = &scif2; @@ -50,27 +50,6 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - - memory@500000000 { - device_type = "memory"; - reg = <0x5 0x00000000 0x0 0x40000000>; - }; - - memory@600000000 { - device_type = "memory"; - reg = <0x6 0x00000000 0x0 0x40000000>; - }; - - memory@700000000 { - device_type = "memory"; - reg = <0x7 0x00000000 0x0 0x40000000>; - }; - x12_clk: x12 { compatible = "fixed-clock"; #clock-cells = <0>; -- 2.7.4
