On Tue, Apr 25, 2017 at 08:32:07PM +0200, Marek Vasut wrote: > Add DT bindings for the ROHM BD9571MWV-M PMIC. This PMIC has > the following features: > - multiple voltage monitors for 1V8, 2V5, 3V3 voltage rail > - one voltage regulator for DVFS > - two GPIOs > > Signed-off-by: Marek Vasut <[email protected]> > Cc: [email protected] > Cc: Rob Herring <[email protected]> > Cc: Geert Uytterhoeven <[email protected]> > Cc: [email protected] > --- > V2: - Drop the compatible = "regulator-fixed" from the binding example, > it should not be there. > - List the VD09 regulator > --- > .../devicetree/bindings/mfd/bd9571mwv.txt | 49 > ++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/bd9571mwv.txt > > diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt > b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt > new file mode 100644 > index 000000000000..ce24231edd7d > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt > @@ -0,0 +1,49 @@ > +* ROHM BD9571MWV Power Management Integrated Circuit (PMIC) bindings > + > +Required properties: > + - compatible : Should be "rohm,bd9571mwv". > + - reg : I2C slave address. > + - interrupt-parent : Phandle to the parent interrupt controller. > + - interrupts : The interrupt line the device is connected to. > + - interrupt-controller : Marks the device node as an interrupt > controller. > + - #interrupt-cells : The number of cells to describe an IRQ, should be 2. > + The first cell is the IRQ number. > + The second cell is the flags, encoded as trigger > + masks from ../interrupt-controller/interrupts.txt. > + - gpio-controller : Marks the device node as a GPIO Controller. > + - #gpio-cells : Should be two. The first cell is the pin number > and > + the second cell is used to specify flags. > + See ../gpio/gpio.txt for more information. > + - regulators: : List of child nodes that specify the regulator > + initialization data. Child nodes must be named > + after their hardware counterparts: > + - vd09 > + - vd18 > + - vd25 > + - vd33 > + - dvfs > + Each child node is defined using the standard > + binding for regulators. > + > +Example: > + > + pmic: bd9571mwv@30 {
pmic@30 ... Otherwise, Acked-by: Rob Herring <[email protected]>
