Hi Jacopo,
On Thu, Apr 6, 2017 at 4:20 PM, Jacopo Mondi <[email protected]> wrote:
> Add documentation for max9611 driver.
> Document attributes describing value of shunt resistor installed between
> RS+ and RS- voltage sense inputs.
>
> Signed-off-by: Jacopo Mondi <[email protected]>
> ---
> Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
> b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
> new file mode 100644
> index 0000000..6d2d2b0
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
> @@ -0,0 +1,17 @@
> +What: /sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
> +Date: March 2017
> +KernelVersion: 4.12
> +Contact: [email protected]
> +Description: The value of the shunt resistor used to compute power drain on
> + common input voltage pin (RS+). In Ohms.
> +
> +What: /sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
> +Date: March 2017
> +KernelVersion: 4.12
> +Contact: [email protected]
> +Description: The value of the shunt resistor used to compute current
> flowing
> + between RS+ and RS- voltage sense inputs. In Ohms.
> +
> +These attributes describe a single physical component, exposed as two
> distinct
> +attributes as it is used to calculate two different values: power load and
> +current flowing between RS+ and RS- inputs.
On my Salvator-X, the value is "5.000", which matches milli-Ohms?
DT says: "shunt-resistor-micro-ohms = <5000>;"
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
