Hi Laurent,
On Wed, May 10, 2017 at 2:29 PM, Laurent Pinchart
<[email protected]> wrote:
> On Wednesday 10 May 2017 10:57:04 Geert Uytterhoeven wrote:
>> On Wed, May 10, 2017 at 9:04 AM, Laurent Pinchart wrote:
>> > The DU1 and DU2 external dot clocks are fixed frequency clock generators
>> > running at 33MHz.
>> >
>> > Signed-off-by: Laurent Pinchart
>> > <[email protected]>
>> > ---
>> >
>> > arch/arm64/boot/dts/renesas/salvator-x.dtsi | 23 +++++++++++++++++++++++
>> > 1 file changed, 23 insertions(+)
>> >
>> > diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi
>> > b/arch/arm64/boot/dts/renesas/salvator-x.dtsi index
>> > 2cd0cce818e7..884c63ebba69 100644
>> > --- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi
>> > +++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
>> > @@ -212,6 +212,19 @@
>> >
>> > #clock-cells = <0>;
>> > clock-frequency = <24576000>;
>> >
>> > };
>> >
>> > +
>> > + /* External DU dot clocks */
>> > + x21_clk: x21-clock {
>> > + compatible = "fixed-clock";
>> > + #clock-cells = <0>;
>> > + clock-frequency = <33000000>;
>> > + };
>> > +
>> > + x22_clk: x22-clock {
>> > + compatible = "fixed-clock";
>> > + #clock-cells = <0>;
>> > + clock-frequency = <33000000>;
>> > + };
>> >
>> > };
>> >
>> > &audio_clk_a {
>> >
>> > @@ -238,6 +251,16 @@
>> >
>> > pinctrl-names = "default";
>> > status = "okay";
>> >
>> > + clocks = <&cpg CPG_MOD 724>,
>> > + <&cpg CPG_MOD 723>,
>> > + <&cpg CPG_MOD 722>,
>> > + <&cpg CPG_MOD 721>,
>> > + <&cpg CPG_MOD 727>,
>> > + <&x21_clk>,
>> > + <&x22_clk>;
>> > + clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
>> > + "dclkin.1", "dclkin.2";
>>
>> Another H3 vs. M3-W oddity: DU_DOTCLKIN2 is wired to pin AR7 on H3 SiP,
>> and AR8 on M3-W SiP.
>> But crystal X22 is wired to AR7, and AR8 is not connected.
>> Hence on M3-W, "dclkin.2" is not available, cfr. "NC <M3SiP>" in the
>> schematics.
>
> Indeed :-/ X22 is populated though. No wonder the board is expensive :-)
And both crystals generate the same frequency. What's the point of that?
(repeat from Lager x2 == x13?).
>> So either the du clocks and -names should be overridden in
>> r8a7795-salvator.dtsi to add "dclkin.2", or in r8a7796-salvator.dtsi to
>> remove it.
>
> Or specified differently in both. I'll do that, it would be confusing
> otherwise.
That sounds indeed better. Thanks!
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
