Hi Geert, On 2017-05-19 09:27:47 +0200, Geert Uytterhoeven wrote: > The documentation for the "interrupt-names" property only mentions the > per-channel interrupts, while the error interrupt has always been > mandatory, too. > > Fixes: 10f5c8438475909a ("dmaengine: rcar-dmac: Add device tree bindings > documentation") > Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be> > --- > Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt > b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt > index 3316a9c2e638b98c..79a204d50234f287 100644 > --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt > +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt > @@ -30,8 +30,9 @@ Required Properties: > > - interrupts: interrupt specifiers for the DMAC, one for each entry in > interrupt-names. > -- interrupt-names: one entry per channel, named "ch%u", where %u is the > - channel number ranging from zero to the number of channels minus one. > +- interrupt-names: one entry for the error interrupt, named "error", plus one > + entry per channel, named "ch%u", where %u is the channel number ranging > from > + zero to the number of channels minus one.
Reviewed-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se> > > - clock-names: "fck" for the functional clock > - clocks: a list of phandle + clock-specifier pairs, one for each entry > -- > 2.7.4 > -- Regards, Niklas Söderlund