Hi Wolfram,

On Tue, Jun 21, 2016 at 3:11 PM, Geert Uytterhoeven
<[email protected]> wrote:
> On Mon, Jun 20, 2016 at 8:40 AM, Wolfram Sang <[email protected]> wrote:
>> On group configuration, bail out if setting one of the individual pins
>> fails. We don't need to roll-back, the pinctrl core will do this for us.
>>
>> Signed-off-by: Wolfram Sang <[email protected]>
>> ---
>>
>> Tested on a Lager and Salvator-X without problems. Needs probably more 
>> testing
>> on various HW to avoid regressions?
>
> Your patch causes the display to fail on r8a7740/armadillo.
>
> Disabling the error propagation and adding more debug prints reveals:
>
> +sh_pfc_pinconf_validate: pin 58: 15 not supported
> +sh_pfc_pinconf_set:694: config 0: sh_pfc_pinconf_validate() failed
> +sh_pfc_pinconf_group_set:781: sh_pfc_pinconf_set() failed -524 for
> pin 0 of group lcd0_data24_0
> +sh_pfc_pinconf_validate: pin 57: 15 not supported
> +sh_pfc_pinconf_set:694: config 0: sh_pfc_pinconf_validate() failed
> +sh_pfc_pinconf_group_set:781: sh_pfc_pinconf_set() failed -524 for
> pin 1 of group lcd0_data24_0
> +sh_pfc_pinconf_validate: pin 56: 15 not supported
> +sh_pfc_pinconf_set:694: config 0: sh_pfc_pinconf_validate() failed
> +sh_pfc_pinconf_group_set:781: sh_pfc_pinconf_set() failed -524 for
> pin 2 of group lcd0_data24_0
>  ...
>
> 15 = PIN_CONFIG_OUTPUT
>
> No idea why this is set for all pins of the lcd0_data24_0 group (and not for 
> any
> other pin or group on any other SoC).

This is caused by the "output-high" property for the GPIO hog.
Due to both lcd0 pinmux and GPIO hog being part of the same device node,
"output-high" is also applied to the lcd0 pins, which fails.

RFC fix in "[PATCH/RFC] ARM: dts: armadillo800eva: Split LCD mux and gpio"
(https://patchwork.kernel.org/patch/9745831/)/

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Reply via email to