From: Kieran Bingham <[email protected]> The Salvator boards use an ADV7482 receiver for HDMI and CVBS inputs.
Provide ADV7482 node on the i2c4 bus, along with connectors for the hdmi and cvbs inputs, and link to the csi20 and csi40 nodes as outputs. Signed-off-by: Kieran Bingham <[email protected]> v4: - dt: Rebase to dts/renesas/salvator-x.dtsi - dt: Use AIN0-7 rather than AIN1-8 v5: - dt: Move to salvator-common.dtsi --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 123 ++++++++++++++++- 1 file changed, 123 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index aef35e0b685a..d74fb55c38bc 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -65,6 +65,27 @@ enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; }; + cvbs-in { + compatible = "composite-video-connector"; + label = "CVBS IN"; + + port { + cvbs_con: endpoint { + }; + }; + }; + + hdmi-in { + compatible = "hdmi-connector"; + label = "HDMI IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + }; + }; + }; + reg_1p8v: regulator0 { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; @@ -257,6 +278,59 @@ }; }; +&csi20 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + csi20_in: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&adv7482_txb>; + }; + }; + }; +}; + +&csi40 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7482_txa>; + }; + }; + }; +}; + +&cvbs_con { + port { + cvbs_in: endpoint { + remote-endpoint = <&adv7482_ain7>; + }; + }; +}; + +&hdmi_in_con { + port { + hdmi_in: endpoint { + remote-endpoint = <&adv7482_hdmi>; + }; + }; +}; + &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -343,6 +417,55 @@ shunt-resistor-micro-ohms = <5000>; }; + + video-receiver@70 { + compatible = "adi,adv7482"; + reg = <0x70>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio6>; + interrupt-names = "intrq1", "intrq2"; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>, + <31 IRQ_TYPE_LEVEL_LOW>; + + port@7 { + reg = <7>; + + adv7482_ain7: endpoint { + remote-endpoint = <&cvbs_in>; + }; + }; + + port@8 { + reg = <8>; + + adv7482_hdmi: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@10 { + reg = <10>; + + adv7482_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + + port@11 { + reg = <11>; + + adv7482_txb: endpoint { + clock-lanes = <0>; + data-lanes = <1>; + remote-endpoint = <&csi20_in>; + }; + }; + }; }; &i2c_dvfs { -- git-series 0.9.1
