On 06/15/17 10:24, Laurent Pinchart wrote:
> The WPF vertical flip is only supported on Gen3 SoCs on the VSP2-I.
> Don't enable it on other VSP2 instances.
>
> Signed-off-by: Laurent Pinchart <[email protected]>
Should this go to older kernels as well? Or is that not needed?
Regards,
Hans
> ---
> drivers/media/platform/vsp1/vsp1_drv.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/platform/vsp1/vsp1_drv.c
> b/drivers/media/platform/vsp1/vsp1_drv.c
> index 048446af5ae7..239996cf882e 100644
> --- a/drivers/media/platform/vsp1/vsp1_drv.c
> +++ b/drivers/media/platform/vsp1/vsp1_drv.c
> @@ -690,7 +690,7 @@ static const struct vsp1_device_info vsp1_device_infos[]
> = {
> .version = VI6_IP_VERSION_MODEL_VSPBD_GEN3,
> .model = "VSP2-BD",
> .gen = 3,
> - .features = VSP1_HAS_BRU | VSP1_HAS_WPF_VFLIP,
> + .features = VSP1_HAS_BRU,
> .rpf_count = 5,
> .wpf_count = 1,
> .num_bru_inputs = 5,
> @@ -700,7 +700,7 @@ static const struct vsp1_device_info vsp1_device_infos[]
> = {
> .model = "VSP2-BC",
> .gen = 3,
> .features = VSP1_HAS_BRU | VSP1_HAS_CLU | VSP1_HAS_HGO
> - | VSP1_HAS_LUT | VSP1_HAS_WPF_VFLIP,
> + | VSP1_HAS_LUT,
> .rpf_count = 5,
> .wpf_count = 1,
> .num_bru_inputs = 5,
> @@ -709,7 +709,7 @@ static const struct vsp1_device_info vsp1_device_infos[]
> = {
> .version = VI6_IP_VERSION_MODEL_VSPD_GEN3,
> .model = "VSP2-D",
> .gen = 3,
> - .features = VSP1_HAS_BRU | VSP1_HAS_LIF | VSP1_HAS_WPF_VFLIP,
> + .features = VSP1_HAS_BRU | VSP1_HAS_LIF,
> .rpf_count = 5,
> .wpf_count = 2,
> .num_bru_inputs = 5,
>
