Hi Mark > > ak4613 CTRL2::CKS controls Speed Mode (Normal/Double/Quad) for Master > > Mode. In default, Normal Mode uses 512fs, but in such case, requested > > input clock for all mode will be same. Then, it might not be eble to > > support correct output if input clock was not enough. > > This patch uses 256fs, and reduse requested imput clock for Noral Mode. > > > snd_soc_update_bits(codec, CTRL1, FMT_MASK, fmt_ctrl); > > - snd_soc_update_bits(codec, CTRL2, DFS_MASK, ctrl2); > > + > > + /* CKS = 00 */ > > + snd_soc_update_bits(codec, CTRL2, (CKS_MASK | DFS_MASK), ctrl2); > > This looks board specific - shouldn't we be setting the speed mode based > on a combination of the sampling rate and the master clock for the > device?
I removed "FIXME" comments, but OK. I will fixup this patch-set Best regards --- Kuninori Morimoto
