On Thu, Jan 01, 1970 at 03:00:01AM +0300, Sergei Shtylyov wrote: > Add the IMR-L[S]X3 clocks to the R8A7792 device tree. > > Based on the original patch by Roman Meshkevich > <[email protected]>. > > Signed-off-by: Sergei Shtylyov <[email protected]> > > --- > arch/arm/boot/dts/r8a7792.dtsi | 15 ++++++++++++--- > include/dt-bindings/clock/r8a7792-clock.h | 7 +++++++ > 2 files changed, 19 insertions(+), 3 deletions(-) > > Index: renesas/arch/arm/boot/dts/r8a7792.dtsi > =================================================================== > --- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi > +++ renesas/arch/arm/boot/dts/r8a7792.dtsi > @@ -927,16 +927,25 @@ > "renesas,cpg-mstp-clocks"; > reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; > clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, > - <&zg_clk>, <&zg_clk>, <&hp_clk>; > + <&zg_clk>, <&zg_clk>, <&hp_clk>, <&zg_clk>, > + <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, > + <&zg_clk>, <&zg_clk>; > #clock-cells = <1>; > clock-indices = < > R8A7792_CLK_VIN5 R8A7792_CLK_VIN4 > R8A7792_CLK_VIN3 R8A7792_CLK_VIN2 > R8A7792_CLK_VIN1 R8A7792_CLK_VIN0 > - R8A7792_CLK_ETHERAVB > + R8A7792_CLK_ETHERAVB R8A7792_CLK_IMR_LX3 > + R8A7792_CLK_IMR_LSX3_1 R8A7792_CLK_IMR_LSX3_0 > + R8A7792_CLK_IMR_LSX3_5 R8A7792_CLK_IMR_LSX3_4 > + R8A7792_CLK_IMR_LSX3_3 R8A7792_CLK_IMR_LSX3_2 > >; > clock-output-names = "vin5", "vin4", "vin3", "vin2", > - "vin1", "vin0", "etheravb"; > + "vin1", "vin0", > + "etheravb", "imr-lx3", > + "imr-lsx3-1", "imr-lsx3-0", > + "imr-lsx3-5", "imr-lsx3-4", > + "imr-lsx3-3", "imr-lsx3-2"; > }; > mstp9_clks: mstp9_clks@e6150994 { > compatible = "renesas,r8a7792-mstp-clocks", > Index: renesas/include/dt-bindings/clock/r8a7792-clock.h > =================================================================== > --- renesas.orig/include/dt-bindings/clock/r8a7792-clock.h > +++ renesas/include/dt-bindings/clock/r8a7792-clock.h > @@ -70,6 +70,13 @@ > #define R8A7792_CLK_VIN1 10 > #define R8A7792_CLK_VIN0 11 > #define R8A7792_CLK_ETHERAVB 12 > +#define R8A7792_CLK_IMR_LX3 21 > +#define R8A7792_CLK_IMR_LSX3_1 22 > +#define R8A7792_CLK_IMR_LSX3_0 23 > +#define R8A7792_CLK_IMR_LSX3_5 25 > +#define R8A7792_CLK_IMR_LSX3_4 26 > +#define R8A7792_CLK_IMR_LSX3_3 27 > +#define R8A7792_CLK_IMR_LSX3_2 28 > > /* MSTP9 */ > #define R8A7792_CLK_GPIO7 4 >
I think this patch needs to be split in two, one for each file, to allow queuing bindings and DT changes in different branches.
