On Wed, 05 Jul 2017 11:29:43 +0200,
Arnaud Pouliquen wrote:
>
>
>
> On 07/05/2017 10:40 AM, Takashi Iwai wrote:
> > On Wed, 05 Jul 2017 10:15:35 +0200,
> > Kuninori Morimoto wrote:
> >>
> >>
> >> From: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
> >>
> >> Current hdmi-codec driver is using hdmi_controls for "ELD" control.
> >> But, hdmi-codec driver might be used from many HDMIs. In such case,
> >> they will use same "ELD" name and kernel will indicate below error.
> >>
> >> xxx: control x:x:x:ELD:x is already present
> >>
> >> hdmi_controls will be registered in soc_probe_component(), and we can
> >> replace it by component driver probe function.
> >>
> >> This patch registers current hdmi_controls in new hdmi_probe().
> >> If hdmi-codec is used from only 1 device, it will use "ELD" as control name
> >> (We can keep compatibility).
> >> If hdmi-codec is used from many devices, it will use "ELD.x" as control
> >> name.
> >
> > The de facto standard way as HD-audio does is to pass the device
> > number of each ELD control as same as the corresponding PCM stream
> > number.
> >
> >
> > thanks,
> >
> > Takashi
> >
> In theory, hdmi_codec_pcm_new already does the job.
> snd_pcm_add_chmap_ctls instantiates the controls using PCM device ID. So
> you should observe (with amixer) 2 controls with same name but not same
> device ID.
Indeed, we can add each ELD control there like a (totally untested)
patch below.
thanks,
Takashi
---
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 22ed0dc88f0a..13d9cf5b1831 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -399,16 +399,13 @@ static int hdmi_codec_chmap_ctl_get(struct snd_kcontrol
*kcontrol,
return 0;
}
-
-static const struct snd_kcontrol_new hdmi_controls[] = {
- {
- .access = SNDRV_CTL_ELEM_ACCESS_READ |
- SNDRV_CTL_ELEM_ACCESS_VOLATILE,
- .iface = SNDRV_CTL_ELEM_IFACE_PCM,
- .name = "ELD",
- .info = hdmi_eld_ctl_info,
- .get = hdmi_eld_ctl_get,
- },
+static const struct snd_kcontrol_new hdmi_eld_ctl = {
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = "ELD",
+ .info = hdmi_eld_ctl_info,
+ .get = hdmi_eld_ctl_get,
};
static int hdmi_codec_new_stream(struct snd_pcm_substream *substream,
@@ -668,6 +665,7 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime
*rtd,
{
struct snd_soc_dai_driver *drv = dai->driver;
struct hdmi_codec_priv *hcp = snd_soc_dai_get_drvdata(dai);
+ struct snd_kcontrol *kctl;
int ret;
dev_dbg(dai->dev, "%s()\n", __func__);
@@ -686,7 +684,12 @@ static int hdmi_codec_pcm_new(struct snd_soc_pcm_runtime
*rtd,
hcp->chmap_info->chmap = hdmi_codec_stereo_chmaps;
hcp->chmap_idx = HDMI_CODEC_CHMAP_IDX_UNKNOWN;
- return 0;
+ /* add ELD ctl with the device number corresponding to the PCM stream */
+ kctl = snd_ctl_new1(&hdmi_eld_ctl, dai->component);
+ if (!kctl)
+ return -ENOMEM;
+ kctl->id.device = rtd->pcm->device;
+ return snd_ctl_add(rtd->card->snd_card, kctl);
}
static struct snd_soc_dai_driver hdmi_i2s_dai = {
@@ -732,8 +735,6 @@ static int hdmi_of_xlate_dai_id(struct snd_soc_component
*component,
static struct snd_soc_codec_driver hdmi_codec = {
.component_driver = {
- .controls = hdmi_controls,
- .num_controls = ARRAY_SIZE(hdmi_controls),
.dapm_widgets = hdmi_widgets,
.num_dapm_widgets = ARRAY_SIZE(hdmi_widgets),
.dapm_routes = hdmi_routes,
