On Wed, Jun 21, 2017 at 03:17:30PM +0300, Laurent Pinchart wrote:
> Add the HDMI encoder to the R8A7796 DT in disabled state.
>
> Signed-off-by: Laurent Pinchart <[email protected]>
> ---
> arch/arm64/boot/dts/renesas/r8a7796.dtsi | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> Changes since v2:
>
> - Rename node to hdmi@fead0000
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> index ad9cd1c3199f..8c1a770c41cd 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> @@ -1532,6 +1532,31 @@
> power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> };
>
> + hdmi0: hdmi@fead0000 {
> + compatible = "renesas,r8a7796-hdmi",
> "renesas,rcar-gen3-hdmi";
> + reg = <0 0xfead0000 0 0x10000>;
> + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 729>, <&cpg CPG_CORE
> R8A7796_CLK_HDMI>;
> + clock-names = "iahb", "isfr";
> + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
> + resets = <&cpg 729>;
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + port@0 {
> + reg = <0>;
> + dw_hdmi0_in: endpoint {
> + remote-endpoint =
> <&du_out_hdmi0>;
du_out_hdmi0 is used here but does not exist until the following patch is
applied. What to do?
> + };
> + };
> + port@1 {
> + reg = <1>;
> + };
> + };
> + };
> +
> du: display@feb00000 {
> /* placeholder */
>
> --
> Regards,
>
> Laurent Pinchart
>
