From: Chris Brandt <[email protected]> Add pin configuration for LED0 which is connected to a GPIO.
Signed-off-by: Chris Brandt <[email protected]> Signed-off-by: Simon Horman <[email protected]> --- arch/arm/boot/dts/r7s72100-rskrza1.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts index f8285b951140..5dcaaf131d27 100644 --- a/arch/arm/boot/dts/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "r7s72100.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { @@ -34,6 +35,15 @@ #address-cells = <1>; #size-cells = <1>; }; + + leds { + status = "okay"; + compatible = "gpio-leds"; + + led0 { + gpios = <&port7 1 GPIO_ACTIVE_LOW>; + }; + }; }; &extal_clk { -- 2.1.4
