From: Biju Das <[email protected]> Define the iWave RainboW-G22D board dependent part of the Ethernet AVB device node.
On some older versions of the platform (before R4.0) the phy address may be 1 or 3. The address is fixed to 3 for R4.0 onwards (which will be the first mainstream release), hence using 3 in the dts. Signed-off-by: Biju Das <[email protected]> Signed-off-by: Chris Paterson <[email protected]> Signed-off-by: Simon Horman <[email protected]> --- arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 442a5cbb0838..aac84c67a31d 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -17,9 +17,11 @@ aliases { serial0 = &scif4; + ethernet0 = &avb; }; chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; }; @@ -29,6 +31,11 @@ groups = "scif4_data_b"; function = "scif4"; }; + + avb_pins: avb { + groups = "avb_mdio", "avb_gmii"; + function = "avb"; + }; }; &scif4 { @@ -37,3 +44,22 @@ status = "okay"; }; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy3>; + phy-mode = "gmii"; + renesas,no-ether-link; + status = "okay"; + + phy3: ethernet-phy@3 { + /* + * On some older versions of the platform (before R4.0) the phy address + * may be 1 or 3. The address is fixed to 3 for R4.0 onwards. + */ + reg = <3>; + micrel,led-mode = <1>; + }; +}; -- 2.1.4
