Hello!
On 9/29/2017 3:10 AM, Kuninori Morimoto wrote:
From: Kuninori Morimoto <[email protected]>
Same CTU might be used few times if system/platform is using MIX.
For example below case.
DAI0 playback = <&src0 &ctu02 &mix0 &dvc0 &ssi0>;
DAI1 playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
This case, ALSA will have CTU,0 and CTU,1 kcontrol interfaces,
but these are same CTU. This is confusable.
Again, confusing,
This patch adds new flags and avoid such case.
Signed-off-by: Kuninori Morimoto <[email protected]>
Tested-by: Hiroyuki Yokoyama <[email protected]>
---
sound/soc/sh/rcar/ctu.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/sound/soc/sh/rcar/ctu.c b/sound/soc/sh/rcar/ctu.c
index e7f53f4..1536d9d 100644
--- a/sound/soc/sh/rcar/ctu.c
+++ b/sound/soc/sh/rcar/ctu.c
@@ -81,8 +81,11 @@ struct rsnd_ctu {
struct rsnd_kctrl_cfg_m sv3;
struct rsnd_kctrl_cfg_s reset;
int channels;
+ u32 flags;
};
+#define KCTRL_INITIALIZEED (1 << 0)
+
Again, one E is enough. :-)
[...]
MBR, Sergei
