No need to do it manually.
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
---
jacopo: can you test this on Migo-R, please, on top of the other I2C patches?
I tested it on a Lager and it worked there. Will try Gen3 later, too.
drivers/i2c/busses/i2c-sh_mobile.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c
b/drivers/i2c/busses/i2c-sh_mobile.c
index ebd146ccb24465..80561ffbcf7b46 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -702,7 +702,6 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
/* Wake up device and enable clock */
pm_runtime_get_sync(pd->dev);
- clk_prepare_enable(pd->clk);
/* Process all messages */
for (i = 0; i < num; i++) {
@@ -743,7 +742,6 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
iic_wr(pd, ICCR, 0);
/* Disable clock and mark device as idle */
- clk_disable_unprepare(pd->clk);
pm_runtime_put_sync(pd->dev);
return err ?: num;
--
2.11.0
