Hi!
This adds I2C controllers to the D3 device tree and enables I2C busses 0
and 1 on the Draak board. (I2C2 is not connected on that board.)
Includes missing pins, DMA support and the Draak's serial EEPROM.
CU
Uli
Ulrich Hecht (6):
pinctrl: sh-pfc: r8a77995: add missing pins SCL0 and SDA0 to pinmux
data
i2c: rcar: enable for R-Car D3 (r8a77995)
arm64: renesas: r8a77995: add I2C support
arm64: renesas: draak: enable I2C controller 0 and EEPROM
arm64: renesas: draak: enable I2C controller 1
i2c: rcar: document R8A77970 bindings
Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 1 +
arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 28 ++++++++++
arch/arm64/boot/dts/renesas/r8a77995.dtsi | 64 ++++++++++++++++++++++
drivers/i2c/busses/i2c-rcar.c | 1 +
drivers/pinctrl/sh-pfc/pfc-r8a77995.c | 2 +
5 files changed, 96 insertions(+)
--
2.7.4
