"Used internally" is vague. What it actually means is that those fields are populated by the core if valid GPIOs are provided. Change the comments to reflect that.
Cc: Phil Reid <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Jarkko Nikula <[email protected]> Cc: Claudio Foellmi <[email protected]> Cc: Andrzej Hajda <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> --- include/linux/i2c.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 5d7f3c1853ae4b..f8a9d81e911e52 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -545,12 +545,12 @@ struct i2c_timings { * @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or * i2c_generic_scl_recovery(). * @get_scl: This gets current value of SCL line. Mandatory for generic SCL - * recovery. Used internally for generic GPIO recovery. - * @set_scl: This sets/clears SCL line. Mandatory for generic SCL recovery. Used - * internally for generic GPIO recovery. + * recovery. Populated internally for generic GPIO recovery. + * @set_scl: This sets/clears the SCL line. Mandatory for generic SCL recovery. + * Populated internally for generic GPIO recovery. * @get_sda: This gets current value of SDA line. Optional for generic SCL - * recovery. Used internally, if sda_gpio is a valid GPIO, for generic GPIO - * recovery. + * recovery. Populated internally, if sda_gpio is a valid GPIO, for generic + * GPIO recovery. * @prepare_recovery: This will be called before starting recovery. Platform may * configure padmux here for SDA/SCL line or something else they want. * @unprepare_recovery: This will be called after completing recovery. Platform -- 2.11.0
