Hi Niklas,
Thank you for the patch.
On Friday, 8 December 2017 03:08:32 EET Niklas Söderlund wrote:
> Part of the format alignment and checking can be shared with the Gen3
> format handling. Break that part out to its own function. While doing
> this clean up the checking and add more checks.
I'd split that in two patches, they are unrelated and should be reviewed
separately.
> Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> Reviewed-by: Hans Verkuil <hans.verk...@cisco.com>
> ---
> drivers/media/platform/rcar-vin/rcar-v4l2.c | 98 +++++++++++++------------
> 1 file changed, 51 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> b/drivers/media/platform/rcar-vin/rcar-v4l2.c index
> 56c5183f55922e1d..0ffbf0c16fb7b00e 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -86,6 +86,56 @@ static u32 rvin_format_sizeimage(struct v4l2_pix_format
> *pix) return pix->bytesperline * pix->height;
> }
>
> +static int rvin_format_align(struct rvin_dev *vin, struct v4l2_pix_format
> *pix)
> +{
> + u32 walign;
> +
> + /* If requested format is not supported fallback to the default */
> + if (!rvin_format_from_pixel(pix->pixelformat)) {
> + vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
> + pix->pixelformat, RVIN_DEFAULT_FORMAT);
> + pix->pixelformat = RVIN_DEFAULT_FORMAT;
> + }
> +
> + switch (pix->field) {
> + case V4L2_FIELD_TOP:
> + case V4L2_FIELD_BOTTOM:
> + case V4L2_FIELD_NONE:
> + case V4L2_FIELD_INTERLACED_TB:
> + case V4L2_FIELD_INTERLACED_BT:
> + case V4L2_FIELD_INTERLACED:
> + break;
> + default:
> + pix->field = V4L2_FIELD_NONE;
> + break;
> + }
> +
> + /* Check that colorspace is reasonable, if not keep current */
> + if (!pix->colorspace || pix->colorspace >= 0xff)
Where does 0xff come from ? It seems a bit random to me.
> + pix->colorspace = vin->format.colorspace;
I don't think that's a good idea. You should pick a default if the colorspace
can't be supported. Beside, what's the point in accepting colorspaces if
they're not handled by the driver ? Why don't you just set a fixed value based
on the colorspace reported by the source ?
> + /* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> + walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> +
> + /* Limit to VIN capabilities */
> + v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
> + &pix->height, 4, vin->info->max_height, 2, 0);
> +
> + pix->bytesperline = rvin_format_bytesperline(pix);
> + pix->sizeimage = rvin_format_sizeimage(pix);
You're now hardcoding those values instead of only enforcing a minimum. Why is
that ?
> +
> + if (vin->info->chip == RCAR_M1 &&
> + pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
> + vin_err(vin, "pixel format XBGR32 not supported on M1\n");
> + return -EINVAL;
> + }
You should move this with the other format check at the beginning of the
function. and selecting the default format instead of returning an error.
> + vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> + pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> +
> + return 0;
> +}
> +
> /*
> ---------------------------------------------------------------------------
> -- * V4L2
> */
> @@ -191,64 +241,18 @@ static int __rvin_try_format_source(struct rvin_dev
> *vin, static int __rvin_try_format(struct rvin_dev *vin,
> u32 which, struct v4l2_pix_format *pix)
> {
> - u32 walign;
> int ret;
>
> /* Keep current field if no specific one is asked for */
> if (pix->field == V4L2_FIELD_ANY)
> pix->field = vin->format.field;
>
> - /* If requested format is not supported fallback to the default */
> - if (!rvin_format_from_pixel(pix->pixelformat)) {
> - vin_dbg(vin, "Format 0x%x not found, using default 0x%x\n",
> - pix->pixelformat, RVIN_DEFAULT_FORMAT);
> - pix->pixelformat = RVIN_DEFAULT_FORMAT;
> - }
> -
> - /* Always recalculate */
> - pix->bytesperline = 0;
> - pix->sizeimage = 0;
> -
> /* Limit to source capabilities */
> ret = __rvin_try_format_source(vin, which, pix);
> if (ret)
> return ret;
>
> - switch (pix->field) {
> - case V4L2_FIELD_TOP:
> - case V4L2_FIELD_BOTTOM:
> - case V4L2_FIELD_NONE:
> - case V4L2_FIELD_INTERLACED_TB:
> - case V4L2_FIELD_INTERLACED_BT:
> - case V4L2_FIELD_INTERLACED:
> - break;
> - default:
> - pix->field = V4L2_FIELD_NONE;
> - break;
> - }
> -
> - /* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
> - walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
> -
> - /* Limit to VIN capabilities */
> - v4l_bound_align_image(&pix->width, 2, vin->info->max_width, walign,
> - &pix->height, 4, vin->info->max_height, 2, 0);
> -
> - pix->bytesperline = max_t(u32, pix->bytesperline,
> - rvin_format_bytesperline(pix));
> - pix->sizeimage = max_t(u32, pix->sizeimage,
> - rvin_format_sizeimage(pix));
> -
> - if (vin->info->chip == RCAR_M1 &&
> - pix->pixelformat == V4L2_PIX_FMT_XBGR32) {
> - vin_err(vin, "pixel format XBGR32 not supported on M1\n");
> - return -EINVAL;
> - }
> -
> - vin_dbg(vin, "Format %ux%u bpl: %d size: %d\n",
> - pix->width, pix->height, pix->bytesperline, pix->sizeimage);
> -
> - return 0;
> + return rvin_format_align(vin, pix);
> }
>
> static int rvin_querycap(struct file *file, void *priv,
--
Regards,
Laurent Pinchart
