Hi Jacopo,
Thank you for the patch.
On Wednesday, 15 November 2017 12:56:03 EET Jacopo Mondi wrote:
> Remove soc_camera framework dependencies from tw9910 sensor driver.
> - Handle clock directly
> - Register async subdevice
> - Add platform specific enable/disable functions
> - Adjust build system
>
> This commit does not remove the original soc_camera based driver.
>
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> ---
> drivers/media/i2c/Kconfig | 9 ++++++
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/tw9910.c | 80 +++++++++++++++++++++++++++++++------------
> include/media/i2c/tw9910.h | 6 ++++
> 4 files changed, 75 insertions(+), 21 deletions(-)
[snip]
> diff --git a/drivers/media/i2c/tw9910.c b/drivers/media/i2c/tw9910.c
> index bdb5e0a..f422da2 100644
> --- a/drivers/media/i2c/tw9910.c
> +++ b/drivers/media/i2c/tw9910.c
[snip]
> @@ -582,13 +581,40 @@ static int tw9910_s_register(struct v4l2_subdev *sd,
> }
> #endif
>
> +static int tw9910_power_on(struct tw9910_priv *priv)
> +{
> + int ret;
> +
> + if (priv->info->platform_enable) {
> + ret = priv->info->platform_enable();
> + if (ret)
> + return ret;
> + }
> +
> + if (priv->clk)
> + return clk_enable(priv->clk);
Shouldn't you use clk_prepare_enable() here ?
> + return 0;
> +}
> +
> +static int tw9910_power_off(struct tw9910_priv *priv)
> +{
> + if (priv->info->platform_enable)
> + priv->info->platform_disable();
> +
> + if (priv->clk)
> + clk_disable(priv->clk);
And clk_disable_unprepare() here ?
> +
> + return 0;
> +}
[snip]
> @@ -959,13 +979,27 @@ static int tw9910_probe(struct i2c_client *client,
>
> v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops);
>
> - priv->clk = v4l2_clk_get(&client->dev, "mclk");
> - if (IS_ERR(priv->clk))
> + priv->clk = clk_get(&client->dev, "mclk");
> + if (PTR_ERR(priv->clk) == -ENOENT) {
> + priv->clk = NULL;
> + } else if (IS_ERR(priv->clk)) {
> + dev_err(&client->dev, "Unable to get mclk clock\n");
> return PTR_ERR(priv->clk);
> + }
>
> ret = tw9910_video_probe(client);
> if (ret < 0)
> - v4l2_clk_put(priv->clk);
> + goto error_put_clk;
> +
> + ret = v4l2_async_register_subdev(&priv->subdev);
> + if (ret)
> + goto error_put_clk;
> +
> + return ret;
> +
> +error_put_clk:
> + if (priv->clk)
> + clk_put(priv->clk);
No need to check if priv->clk is NULL here, clk_put() should handle that
properly.
> return ret;
> }
> @@ -973,7 +1007,11 @@ static int tw9910_probe(struct i2c_client *client,
> static int tw9910_remove(struct i2c_client *client)
> {
> struct tw9910_priv *priv = to_tw9910(client);
> - v4l2_clk_put(priv->clk);
> +
> + if (priv->clk)
> + clk_put(priv->clk);
Same here.
> + v4l2_device_unregister_subdev(&priv->subdev);
> +
> return 0;
> }
>
> diff --git a/include/media/i2c/tw9910.h b/include/media/i2c/tw9910.h
> index 90bcf1f..b80e45c 100644
> --- a/include/media/i2c/tw9910.h
> +++ b/include/media/i2c/tw9910.h
> @@ -18,6 +18,9 @@
>
> #include <media/soc_camera.h>
>
> +#define TW9910_DATAWIDTH_8 BIT(0)
> +#define TW9910_DATAWIDTH_16 BIT(1)
> +
> enum tw9910_mpout_pin {
> TW9910_MPO_VLOSS,
> TW9910_MPO_HLOCK,
> @@ -32,6 +35,9 @@ enum tw9910_mpout_pin {
> struct tw9910_video_info {
> unsigned long buswidth;
> enum tw9910_mpout_pin mpout;
How about storing that as an unsigned int that takes values 8 or 16 ? It would
be more explicit (and a bit of kerneldoc for the tw9910_video_info structure
would make that even better).
> + int (*platform_enable)(void);
> + void (*platform_disable)(void);
> };
--
Regards,
Laurent Pinchart
