Hi Sergei,
On Friday, 12 January 2018 17:13:06 EET Sergei Shtylyov wrote:
> On 01/12/2018 03:58 AM, Laurent Pinchart wrote:
> > The Renesas R-Car Gen2 and Gen3 SoCs have internal LVDS encoders. Add
> > corresponding device tree bindings.
> >
> > Signed-off-by: Laurent Pinchart
> > <[email protected]>
> > ---
> >
> > .../bindings/display/bridge/renesas,lvds.txt | 54 +++++++++++++++++
> > MAINTAINERS | 1 +
> > 2 files changed, 55 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt>
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt new
> > file mode 100644
> > index 000000000000..459c56822eda
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > @@ -0,0 +1,54 @@
> > +Renesas R-Car LVDS Encoder
> > +==========================
> > +
> > +These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
> > Gen2
> > +and Gen3 SoCs.
> > +
> > +Required properties:
> > +
> > +- compatible : Shall contain one of
> > + - "renesas,lvds-r8a7743" for R8A7790 (R-Car RZ/G1M) compatible LVDS
> > encoders
> > + - "renesas,lvds-r8a7790" for R8A7790 (R-Car H2) compatible LVDS
> > encoders
> > + - "renesas,lvds-r8a7791" for R8A7791 (R-Car M2-W) compatible LVDS
> > encoders
> > + - "renesas,lvds-r8a7793" for R8A7791 (R-Car M2-N) compatible LVDS
> > encoders
> > + - "renesas,lvds-r8a7795" for R8A7795 (R-Car H3) compatible LVDS
> > encoders
> > + - "renesas,lvds-r8a7796" for R8A7796 (R-Car M3-W) compatible LVDS
> > encoders
> > +
> > +- reg: Base address and length for the memory-mapped registers
> > +- clocks: A phandle + clock-specifier pair for the functional clock
> > +
> > +Requires nodes:
> > +
> > +The LVDS encoder has two video ports. Their connections are modelled
> > using the
> > +OF graph bindings specified in Documentation/devicetree/bindings/
> > graph.txt.
> > +
> > +- Video port 0 corresponds to the parallel input
>
> s/parallel/RGB/, perhaps?
Strictly speaking the LVDS output also carries RGB. I'll replace "parallel"
with "parallel RGB".
> > +- Video port 1 corresponds to the LVDS output
> > +
> > +Each port shall have a single endpoint.
> > +
> > +
> > +Example:
> > +
> > + lvds0: lvds@feb90000 {
> > + compatible = "renesas,lvds-r8a7790";
> > + reg = <0 0xfeb90000 0 0x1c>;
> > + clocks = <&cpg CPG_MOD 726>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + lvds0_in: endpoint {
> > + remote-endpoint = <&du_out_lvds0>;
>
> Err, that "du_out_lvds0" label no longer reflects reality, no?
Well, it's the output of the DU connected to LVDS encoder 0, so I think the
name still makes sense. If you can think of a better name feel free to propose
one, otherwise I'll keep this one.
--
Regards,
Laurent Pinchart
