Hi Uli,
On Wed, Jan 17, 2018 at 4:41 PM, Ulrich Hecht
<[email protected]> wrote:
> This patch adds ZG clock divider support for R-Car Gen3 SoC.
>
> Signed-off-by: Takeshi Kihara <[email protected]>
> Signed-off-by: Ulrich Hecht <[email protected]>
Thanks for your patch!
> --- a/drivers/clk/renesas/rcar-gen3-cpg.c
> +++ b/drivers/clk/renesas/rcar-gen3-cpg.c
> @@ -76,6 +76,7 @@ static void cpg_simple_notifier_register(struct
> raw_notifier_head *notifiers,
> #define CPG_FRQCRC 0x000000e0
> #define CPG_FRQCRC_ZFC_MASK GENMASK(12, 8)
> #define CPG_FRQCRC_Z2FC_MASK GENMASK(4, 0)
> +#define CPG_FRQCRC_ZGFC_MASK GENMASK(28, 24)
According to the BSP, these bits are in FRQCRB, not FRQCRC?
Note that the R-Car Gen3 Hardware User's Manual does not document these
bits, and declares them read-only, always zero...
> @@ -563,6 +564,10 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct
> device *dev,
> return cpg_z_clk_register(core->name, __clk_get_name(parent),
> base, CPG_FRQCRC_Z2FC_MASK);
>
> + case CLK_TYPE_GEN3_ZG:
> + return cpg_z_clk_register(core->name, __clk_get_name(parent),
> + base, CPG_FRQCRC_ZGFC_MASK);
I don't think you can do it like that.
ZG uses FRQCRB instead of FRQCRC, and uses a fixed divider of 4 instead of 2.
While the rest of the handling is similar, both differences need to be taken
into account.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
