Hi Simon, Thanks for your work.
On 2018-01-17 17:17:14 +0100, Simon Horman wrote: > Consistently use a single space after a =. > > This patch removes instances where a tab is used instead. > > This patch should not introduce any functional change. > > Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> > --- > v2 > * New patch > --- > arch/arm/boot/dts/r8a7794.dtsi | 38 +++++++++++++++++++------------------- > 1 file changed, 19 insertions(+), 19 deletions(-) > > diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi > index 106b4e1649ff..79263377ded3 100644 > --- a/arch/arm/boot/dts/r8a7794.dtsi > +++ b/arch/arm/boot/dts/r8a7794.dtsi > @@ -319,20 +319,20 @@ > audma0: dma-controller@ec700000 { > compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac"; > reg = <0 0xec700000 0 0x10000>; > - interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH > - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; > + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH > + GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; > interrupt-names = "error", > "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", > "ch6", "ch7", "ch8", "ch9", "ch10", "ch11", > @@ -1186,11 +1186,11 @@ > */ > compatible = "renesas,rcar_sound-r8a7794", > "renesas,rcar_sound-gen2"; > - reg = <0 0xec500000 0 0x1000>, /* SCU */ > - <0 0xec5a0000 0 0x100>, /* ADG */ > - <0 0xec540000 0 0x1000>, /* SSIU */ > - <0 0xec541000 0 0x280>, /* SSI */ > - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */ > + reg = <0 0xec500000 0 0x1000>, /* SCU */ > + <0 0xec5a0000 0 0x100>, /* ADG */ > + <0 0xec540000 0 0x1000>, /* SSIU */ > + <0 0xec541000 0 0x280>, /* SSI */ > + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri */ > reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; > > clocks = <&cpg CPG_MOD 1005>, > -- > 2.11.0 > -- Regards, Niklas Söderlund
