On Thu, Jan 18, 2018 at 03:20:00AM +0100, Niklas Söderlund wrote:
> Hi Simon,
> 
> Thanks for your patch.
> 
> On 2018-01-17 17:17:17 +0100, Simon Horman wrote:
> > Sort the subnodes of the soc node to improve maintainability.
> > The sort key is the address on the bus with instances of the same
> > IP block grouped together.
> > 
> > This patch should not introduce any functional change.
> > 
> > Signed-off-by: Simon Horman <[email protected]>
> 
> This patch also aligns the comment for audio_clka. This is good but not 
> mentioned in the commit message which confused the review bot, i.e me :-)

Sorry, its probably worth adding that to the changelog.

> Reviewed-by: Niklas Söderlund <[email protected]>
> 
> > ---
> > v2
> > * New patch
> > ---
> >  arch/arm/boot/dts/r8a7794.dtsi | 90 
> > +++++++++++++++++++++---------------------
> >  1 file changed, 45 insertions(+), 45 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> > index 9e5f886f53c5..d588efa6aeaa 100644
> > --- a/arch/arm/boot/dts/r8a7794.dtsi
> > +++ b/arch/arm/boot/dts/r8a7794.dtsi
> > @@ -33,6 +33,35 @@
> >             vin1 = &vin1;
> >     };
> >  
> > +   /*
> > +    * The external audio clocks are configured as 0 Hz fixed frequency
> > +    * clocks by default.
> > +    * Boards that provide audio clocks should override them.
> > +    */
> > +   audio_clka: audio_clka {
> > +           compatible = "fixed-clock";
> > +           #clock-cells = <0>;
> > +           clock-frequency = <0>;
> > +   };
> > +   audio_clkb: audio_clkb {
> > +           compatible = "fixed-clock";
> > +           #clock-cells = <0>;
> > +           clock-frequency = <0>;
> > +   };
> > +   audio_clkc: audio_clkc {
> > +           compatible = "fixed-clock";
> > +           #clock-cells = <0>;
> > +           clock-frequency = <0>;
> > +   };
> > +
> > +   /* External CAN clock */
> > +   can_clk: can {
> > +           compatible = "fixed-clock";
> > +           #clock-cells = <0>;
> > +           /* This value must be overridden by the board. */
> > +           clock-frequency = <0>;
> > +   };
> > +
> >     cpus {
> >             #address-cells = <1>;
> >             #size-cells = <0>;
> > @@ -66,6 +95,22 @@
> >             };
> >     };
> >  
> > +   /* External root clock */
> > +   extal_clk: extal {
> > +           compatible = "fixed-clock";
> > +           #clock-cells = <0>;
> > +           /* This value must be overridden by the board. */
> > +           clock-frequency = <0>;
> > +   };
> > +
> > +   /* External SCIF clock */
> > +   scif_clk: scif {
> > +           compatible = "fixed-clock";
> > +           #clock-cells = <0>;
> > +           /* This value must be overridden by the board. */
> > +           clock-frequency = <0>;
> > +   };
> > +
> >     soc {
> >             compatible = "simple-bus";
> >             interrupt-parent = <&gic>;
> > @@ -1353,55 +1398,10 @@
> >                                   <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) 
> > | IRQ_TYPE_LEVEL_LOW)>;
> >     };
> >  
> > -   /* External root clock */
> > -   extal_clk: extal {
> > -           compatible = "fixed-clock";
> > -           #clock-cells = <0>;
> > -           /* This value must be overridden by the board. */
> > -           clock-frequency = <0>;
> > -   };
> > -
> >     /* External USB clock - can be overridden by the board */
> >     usb_extal_clk: usb_extal {
> >             compatible = "fixed-clock";
> >             #clock-cells = <0>;
> >             clock-frequency = <48000000>;
> >     };
> > -
> > -   /* External CAN clock */
> > -   can_clk: can {
> > -           compatible = "fixed-clock";
> > -           #clock-cells = <0>;
> > -           /* This value must be overridden by the board. */
> > -           clock-frequency = <0>;
> > -   };
> > -
> > -   /* External SCIF clock */
> > -   scif_clk: scif {
> > -           compatible = "fixed-clock";
> > -           #clock-cells = <0>;
> > -           /* This value must be overridden by the board. */
> > -           clock-frequency = <0>;
> > -   };
> > -
> > -   /*
> > -    * The external audio clocks are configured  as 0 Hz fixed
> > -    * frequency clocks by default.  Boards that provide audio
> > -    * clocks should override them.
> > -    */
> > -   audio_clka: audio_clka {
> > -           compatible = "fixed-clock";
> > -           #clock-cells = <0>;
> > -           clock-frequency = <0>;
> > -   };
> > -   audio_clkb: audio_clkb {
> > -           compatible = "fixed-clock";
> > -           #clock-cells = <0>;
> > -           clock-frequency = <0>;
> > -   };
> > -   audio_clkc: audio_clkc {
> > -           compatible = "fixed-clock";
> > -           #clock-cells = <0>;
> > -           clock-frequency = <0>;
> > -   };
> >  };
> > -- 
> > 2.11.0
> > 
> 
> -- 
> Regards,
> Niklas Söderlund
> 

Reply via email to