On 24/01/2018 17:49, Fabrizio Castro wrote: > Hello Daniel, > > I am sorry to bother you, just wondering if you think there are any chances > for this patch to applied on top of v4.16?
You can take it through the renesas tree. Acked-by: Daniel Lezcano <[email protected]> >> Subject: [PATCH v2 1/3] dt-bindings: timer: renesas, cmt: Document >> r8a774[35] CMT support >> >> Document SoC specific compatible strings for r8a7743 and r8a7745. >> No driver change is needed as the fallback strings will activate >> the right code. >> >> Signed-off-by: Fabrizio Castro <[email protected]> >> Reviewed-by: Biju Das <[email protected]> >> Reviewed-by: Geert Uytterhoeven <[email protected]> >> Reviewed-by: Rob Herring <[email protected]> >> Reviewed-by: Simon Horman <[email protected]> >> --- >> v1->v2: >> * "R-Car Gen2 or RZ/G1." -> "R-Car Gen2 and RZ/G1." >> * "all the R-Car" -> "R-Car" >> >> Documentation/devicetree/bindings/timer/renesas,cmt.txt | 14 ++++++++++---- >> 1 file changed, 10 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt >> b/Documentation/devicetree/bindings/timer/renesas,cmt.txt >> index d740989..b40add2 100644 >> --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt >> +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt >> @@ -22,6 +22,10 @@ Required Properties: >> >> - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4. >> - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4. >> + - "renesas,r8a7743-cmt0" for the 32-bit CMT0 device included in r8a7743. >> + - "renesas,r8a7743-cmt1" for the 48-bit CMT1 device included in r8a7743. >> + - "renesas,r8a7745-cmt0" for the 32-bit CMT0 device included in r8a7745. >> + - "renesas,r8a7745-cmt1" for the 48-bit CMT1 device included in r8a7745. >> - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. >> - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. >> - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. >> @@ -31,10 +35,12 @@ Required Properties: >> - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. >> - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. >> >> - - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car >> Gen2. >> - - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car >> Gen2. >> -These are fallbacks for r8a73a4 and all the R-Car Gen2 >> -entrieslisted above. >> + - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car >> Gen2 >> +and RZ/G1. >> + - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car >> Gen2 >> +and RZ/G1. >> +These are fallbacks for r8a73a4, R-Car Gen2 and RZ/G1 entries >> +listed above. >> >> - reg: base address and length of the registers block for the timer >> module. >> - interrupts: interrupt-specifier for the timer, one per channel. >> -- >> 2.7.4 > > > > > Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, > Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered > No. 04586709. > -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
