On 1/31/2018 7:18 PM, Niklas Söderlund wrote:
From: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
Hi,
This series enables the HDMI out put on V3M. It is based on top of the
latest renesas-drivers release and depends on patches from both Laurent
and Sergei.
- [PATCH v2 00/12] R-Car DU: Convert LVDS code to bridge driver
- [PATCH v2 0/2] Add R-Car V3M (R8A77970) support to the DU driver
- [PATCH 0/3] Add R-Car V3M (R8A77970) support to the R-Car LVDS driver
It is tested on V3M by connecting the HDMI output to a monitor and
booting the board. To console shall eventually show up on the screen.
Niklas Söderlund (5):
arm64: dts: renesas: r8a77970: add FCPVD node
arm64: dts: renesas: r8a77970: Add VSPD instance
arm64: dts: renesas: r8a77970: add DU instance
arm64: dts: renesas: r8a77970: add the LVDS instance
I have already posted such series, hadn't you seen it?
arm64: dts: renesas: eagle: add HDMI output using the ADV7511W
Not posted this patch, however -- I was only doing it for the V3M Starter
Kit board.
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 66 +++++++++++++++++++++++
arch/arm64/boot/dts/renesas/r8a77970.dtsi | 72 ++++++++++++++++++++++++++
2 files changed, 138 insertions(+)
MBR, Sergei
