Regulator setup is suboptimal on H2 Stout too.

Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
Cc: Geert Uytterhoeven <geert+rene...@glider.be>
Cc: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
Cc: Simon Horman <horms+rene...@verge.net.au>
Cc: Wolfram Sang <wsa+rene...@sang-engineering.com>
---
 arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c 
b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 44438f344dc8..b749450d361f 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -1,9 +1,9 @@
 /*
  * R-Car Generation 2 da9063/da9210 regulator quirk
  *
- * The r8a7790/lager and r8a7791/koelsch development boards have da9063 and
- * da9210 regulators.  Both regulators have their interrupt request lines tied
- * to the same interrupt pin (IRQ2) on the SoC.
+ * The r8a7790/lager,stout and r8a7791/koelsch development boards have da9063
+ * and da9210 regulators.  Both regulators have their interrupt request lines
+ * tied to the same interrupt pin (IRQ2) on the SoC.
  *
  * After cold boot or da9063-induced restart, both the da9063 and da9210 seem
  * to assert their interrupt request lines.  Hence as soon as one driver
@@ -118,6 +118,7 @@ static int __init rcar_gen2_regulator_quirk(void)
 
        if (!of_machine_is_compatible("renesas,koelsch") &&
            !of_machine_is_compatible("renesas,lager") &&
+           !of_machine_is_compatible("renesas,stout") &&
            !of_machine_is_compatible("renesas,gose"))
                return -ENODEV;
 
-- 
2.15.1

Reply via email to