Hi Sergei,
Thank you for the patch.
On Thursday, 1 March 2018 20:10:16 EET Sergei Shtylyov wrote:
> Add support for the R-Car V3M (R8A77970) SoC to the LVDS encoder driver.
> Note that there are some differences with the other R-Car gen3 SoCs, e.g.
> LVDPLLCR has the same layout as in the R-Car gen2 SoCs...
>
> Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
and applied to my tree.
> ---
> Changes in version 2:
> - shortened the comment to #define RCAR_LVDS_QUIRK_GEN2_PLLCR and applied
> this quitk to all R-Car gen2 SoCs, thus simplifying the check for the gen2
> LVDPLLCR layout;
> - renamed RCAR_LVDS_QUIRK_PHY to RCAR_LVDS_QUIRK_GEN3_LVEN, reworded the
> comment to this #define;
> - removed the 'quirks' variable from rcar_lvds_enable();
> - resolved rejects atop of the recent version of the LVDS driver.
>
> drivers/gpu/drm/rcar-du/rcar_lvds.c | 20 ++++++++++++++++++--
> 1 file changed, 18 insertions(+), 2 deletions(-)
>
> Index: linux/drivers/gpu/drm/rcar-du/rcar_lvds.c
> ===================================================================
> --- linux.orig/drivers/gpu/drm/rcar-du/rcar_lvds.c
> +++ linux/drivers/gpu/drm/rcar-du/rcar_lvds.c
> @@ -32,6 +32,9 @@ enum rcar_lvds_mode {
> };
>
> #define RCAR_LVDS_QUIRK_LANES (1 << 0) /* LVDS lanes 1 and 3
> inverted */
> +#define RCAR_LVDS_QUIRK_GEN2_PLLCR (1 << 1) /* LVDPLLCR has gen2 layout */
> +#define RCAR_LVDS_QUIRK_GEN3_LVEN (1 << 2) /* LVEN bit needs to be set */
> + /* on R8A77970/R8A7799x */
>
> struct rcar_lvds_device_info {
> unsigned int gen;
> @@ -191,7 +194,7 @@ static void rcar_lvds_enable(struct drm_
> rcar_lvds_write(lvds, LVDCHCR, lvdhcr);
>
> /* PLL clock configuration. */
> - if (lvds->info->gen < 3)
> + if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN2_PLLCR)
> lvdpllcr = rcar_lvds_lvdpllcr_gen2(mode->clock);
> else
> lvdpllcr = rcar_lvds_lvdpllcr_gen3(mode->clock);
> @@ -224,6 +227,12 @@ static void rcar_lvds_enable(struct drm_
> rcar_lvds_write(lvds, LVDCR0, lvdcr0);
> }
>
> + if (lvds->info->quirks & RCAR_LVDS_QUIRK_GEN3_LVEN) {
> + /* Turn on the LVDS PHY. */
> + lvdcr0 |= LVDCR0_LVEN;
> + rcar_lvds_write(lvds, LVDCR0, lvdcr0);
> + }
> +
> /* Wait for the startup delay. */
> usleep_range(100, 150);
>
> @@ -485,17 +494,23 @@ static int rcar_lvds_remove(struct platf
>
> static const struct rcar_lvds_device_info rcar_lvds_gen2_info = {
> .gen = 2,
> + .quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR,
> };
>
> static const struct rcar_lvds_device_info rcar_lvds_r8a7790_info = {
> .gen = 2,
> - .quirks = RCAR_LVDS_QUIRK_LANES,
> + .quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR | RCAR_LVDS_QUIRK_LANES,
> };
>
> static const struct rcar_lvds_device_info rcar_lvds_gen3_info = {
> .gen = 3,
> };
>
> +static const struct rcar_lvds_device_info rcar_lvds_r8a77970_info = {
> + .gen = 3,
> + .quirks = RCAR_LVDS_QUIRK_GEN2_PLLCR | RCAR_LVDS_QUIRK_GEN3_LVEN,
> +};
> +
> static const struct of_device_id rcar_lvds_of_table[] = {
> { .compatible = "renesas,r8a7743-lvds", .data = &rcar_lvds_gen2_info },
> { .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_r8a7790_info
> },
> @@ -503,6 +518,7 @@ static const struct of_device_id rcar_lv
> { .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info },
> { .compatible = "renesas,r8a7795-lvds", .data = &rcar_lvds_gen3_info },
> { .compatible = "renesas,r8a7796-lvds", .data = &rcar_lvds_gen3_info },
> + { .compatible = "renesas,r8a77970-lvds", .data =
> &rcar_lvds_r8a77970_info
> }, { }
> };
--
Regards,
Laurent Pinchart
