On other Renesas SoCs, the pin group for the MDIO bus is named "mdio"
instead of "mdc".  Fix the inconsistency, now the pinctrl drivers for
R-Car H3, M3-W, and M3-N have gained support for the traditional pin
group name.

Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
This depends on:
  - pinctrl: sh-pfc: r8a7795-es1: Rename EtherAVB "mdc" pin group to "mdio"
  - pinctrl: sh-pfc: r8a7795: Rename EtherAVB "mdc" pin group to "mdio"
  - pinctrl: sh-pfc: r8a7796: Rename EtherAVB "mdc" pin group to "mdio"
  - pinctrl: sh-pfc: r8a77965: Rename EtherAVB "mdc" pin group to "mdio"
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi 
b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 2a7f36abd2dd85c6..1642bc9c8906f010 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -416,12 +416,12 @@
 
        avb_pins: avb {
                mux {
-                       groups = "avb_link", "avb_mdc", "avb_mii";
+                       groups = "avb_link", "avb_mdio", "avb_mii";
                        function = "avb";
                };
 
-               pins_mdc {
-                       groups = "avb_mdc";
+               pins_mdio {
+                       groups = "avb_mdio";
                        drive-strength = <24>;
                };
 
-- 
2.7.4

Reply via email to