On Wed, Mar 14, 2018 at 06:17:17PM +0300, Sergei Shtylyov wrote: > Hello! > > On 03/14/2018 03:09 PM, Geert Uytterhoeven wrote: > > > On Salvator-X(S), all of the DDR0, DDR1, DDR0C, and DDR1C power rails > > need to be kept powered when backup mode is enabled. Reflect this in > > the "rohm,ddr-backup-power" property for the BD9571MWV PMIC node. > > > > The accessory power switch (SW23) is a toggle switch, hense specify > > "rohm,rstbmode-level". > > > > Signed-off-by: Geert Uytterhoeven <[email protected]> > > --- > > v2: > > - Add rohm,rstbmode-level. > > --- > > arch/arm64/boot/dts/renesas/salvator-common.dtsi | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi > > b/arch/arm64/boot/dts/renesas/salvator-common.dtsi > > index 2a7f36abd2dd85c6..80794c38c2669d75 100644 > > --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi > > +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi > > @@ -376,6 +376,8 @@ > > #interrupt-cells = <2>; > > gpio-controller; > > #gpio-cells = <2>; > > + rohm,ddr-backup-power = <15>; > > Why not 0xf if those are all bit flags?
Hi Geert, could you address this feedback when you have some time?
