From: Jacopo Mondi <[email protected]> As the PHY interface installed on the V3MSK board provides TX and RX channels delays, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI.
Follow up patches will reset the r8a77970 SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <[email protected]> Signed-off-by: Simon Horman <[email protected]> --- arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 8624ca87d6b2..bb554eec57c8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -34,6 +34,7 @@ &avb { renesas,no-ether-link; phy-handle = <&phy0>; + phy-mode = "rgmii-id"; status = "okay"; phy0: ethernet-phy@0 { -- 2.11.0
