[PATCH v2 08/15] v4l: vsp1: Replace manual DRM pipeline input setup in vsp1_du_setup_lif

[Laurent Pinchart]

The vsp1_du_setup_lif() function sets up the DRM pipeline input
manually. This duplicates the code from the
vsp1_du_pipeline_setup_input() function. Replace the manual
implementation by a call to the function.

As the pipeline has no enabled input in vsp1_du_setup_lif(), the
vsp1_du_pipeline_setup_input() function will not setup any RPF, and will
thus not setup formats on the BRU sink pads. This isn't a problem as all
inputs are disabled, and the BRU sink pads will be reconfigured from the
atomic commit handler when inputs will be enabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+rene...@ideasonboard.com>
--
Changes since v1:

- Fixed spelling in commit message
---
 drivers/media/platform/vsp1/vsp1_drm.c | 40 +++++-----------------------------
 1 file changed, 6 insertions(+), 34 deletions(-)

diff --git a/drivers/media/platform/vsp1/vsp1_drm.c 
b/drivers/media/platform/vsp1/vsp1_drm.c
index 6ad8aa6c8138..00ce99bd1605 100644
--- a/drivers/media/platform/vsp1/vsp1_drm.c
+++ b/drivers/media/platform/vsp1/vsp1_drm.c
@@ -412,47 +412,19 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int 
pipe_index,
        dev_dbg(vsp1->dev, "%s: configuring LIF%u with format %ux%u\n",
                __func__, pipe_index, cfg->width, cfg->height);
 
-       /*
-        * Configure the format at the BRU sinks and propagate it through the
-        * pipeline.
-        */
+       /* Setup formats through the pipeline. */
+       ret = vsp1_du_pipeline_setup_input(vsp1, pipe);
+       if (ret < 0)
+               return ret;
+
        memset(&format, 0, sizeof(format));
        format.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-
-       for (i = 0; i < pipe->bru->source_pad; ++i) {
-               format.pad = i;
-
-               format.format.width = cfg->width;
-               format.format.height = cfg->height;
-               format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
-               format.format.field = V4L2_FIELD_NONE;
-
-               ret = v4l2_subdev_call(&pipe->bru->subdev, pad,
-                                      set_fmt, NULL, &format);
-               if (ret < 0)
-                       return ret;
-
-               dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
-                       __func__, format.format.width, format.format.height,
-                       format.format.code, BRU_NAME(pipe->bru), i);
-       }
-
-       format.pad = pipe->bru->source_pad;
+       format.pad = RWPF_PAD_SINK;
        format.format.width = cfg->width;
        format.format.height = cfg->height;
        format.format.code = MEDIA_BUS_FMT_ARGB8888_1X32;
        format.format.field = V4L2_FIELD_NONE;
 
-       ret = v4l2_subdev_call(&pipe->bru->subdev, pad, set_fmt, NULL,
-                              &format);
-       if (ret < 0)
-               return ret;
-
-       dev_dbg(vsp1->dev, "%s: set format %ux%u (%x) on %s pad %u\n",
-               __func__, format.format.width, format.format.height,
-               format.format.code, BRU_NAME(pipe->bru), i);
-
-       format.pad = RWPF_PAD_SINK;
        ret = v4l2_subdev_call(&pipe->output->entity.subdev, pad, set_fmt, NULL,
                               &format);
        if (ret < 0)
-- 
Regards,

Laurent Pinchart