Hi Laurent,

On Fri, Apr 06, 2018 at 04:51:11PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Friday, 6 April 2018 16:08:12 EEST Jacopo Mondi wrote:
> > From: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> >
> > Enable HDMI output adding the HDMI connector and the ADV7511W, connected
> > to THC63LVD1024 LVDS decoder output.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> > Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> > ---
> >  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 51 ++++++++++++++++++++++-
> >  1 file changed, 50 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 9d0e65d..e9f7b83
> > 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > @@ -32,6 +32,17 @@
> >             reg = <0x0 0x48000000 0x0 0x38000000>;
> >     };
> >
> > +   hdmi-out {
> > +           compatible = "hdmi-connector";
> > +           type = "a";
> > +
> > +           port {
> > +                   hdmi_con_out: endpoint {
> > +                           remote-endpoint = <&adv7511_out>;
> > +                   };
> > +           };
> > +   };
> > +
> >     thc63lvd1024: lvds-decoder {
> >             compatible = "thine,thc63lvd1024";
> >
> > @@ -41,11 +52,17 @@
> >
> >                     port@0 {
> >                             reg = <0>;
> > -
>
> This is unrelated, if you don't want a blank line here remove it from patch
> 6/7 :-)

No, you're right, this is a leftover from me splitting a single a
patch in 3. According to your comments on other patches in the series
I shouldn't have done that to begin with :)

Thanks
  j

>
> >                             thc63lvd1024_in: endpoint {
> >                                     remote-endpoint = <&lvds0_out>;
> >                             };
> >                     };
> > +
> > +                   port@2 {
> > +                           reg = <2>;
> > +                           thc63lvd1024_out: endpoint {
> > +                                   remote-endpoint = <&adv7511_in>;
> > +                           };
> > +                   };
> >             };
> >     };
> >  };
> > @@ -85,6 +102,38 @@
> >             gpio-controller;
> >             #gpio-cells = <2>;
> >     };
> > +
> > +   hdmi@39 {
> > +           compatible = "adi,adv7511w";
> > +           reg = <0x39>;
> > +           interrupt-parent = <&gpio1>;
> > +           interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> > +
> > +           adi,input-depth = <8>;
> > +           adi,input-colorspace = "rgb";
> > +           adi,input-clock = "1x";
> > +           adi,input-style = <1>;
> > +           adi,input-justification = "evenly";
> > +
> > +           ports {
> > +                   #address-cells = <1>;
> > +                   #size-cells = <0>;
> > +
> > +                   port@0 {
> > +                           reg = <0>;
> > +                           adv7511_in: endpoint {
> > +                                   remote-endpoint = <&thc63lvd1024_out>;
> > +                           };
> > +                   };
> > +
> > +                   port@1 {
> > +                           reg = <1>;
> > +                           adv7511_out: endpoint {
> > +                                   remote-endpoint = <&hdmi_con_out>;
> > +                           };
> > +                   };
> > +           };
> > +   };
> >  };
> >
> >  &pfc {
>
> With patches 5/7, 6/7 and 7/7 merged together and the pinmux removed,
>
> Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>
>
> --
> Regards,
>
> Laurent Pinchart
>
>
>

Attachment: signature.asc
Description: PGP signature

Reply via email to