*Warning -- this requires the base RZ/N1 support patches already posted *

This is a tentative patch series for enabling the second CA7 of the RZ/N1D.
It's based on a spin_table method, and it reuses the same binding property
as that driver.

One question is: Do i have to document it separately, or is it sufficiently

Michel Pollet (3):
  dt-bindings: cpu: Add Renesas RZ/N1D SMP enable method.
  ARM: dts: Renesas RZ/N1D SMP enable method
  arm: shmobile: Add the RZ/N1D SMP enabler driver.

 Documentation/devicetree/bindings/arm/cpus.txt |  1 +
 arch/arm/boot/dts/r9a06g032.dtsi               |  2 +
 arch/arm/mach-shmobile/Makefile                |  1 +
 arch/arm/mach-shmobile/smp-r9a06g032.c         | 87 ++++++++++++++++++++++++++
 4 files changed, 91 insertions(+)
 create mode 100644 arch/arm/mach-shmobile/smp-r9a06g032.c


Reply via email to